judetf
Senior Member
Joined: January 23 2008
Online Status: Offline
Posts: 234
|
| Posted: November 29 2008 at 15:03 | IP Logged
|
|
|
Dave,
Earlier this year I started this thread asking about controlling a Switchlinc and all cross-linked KPL buttons with a single PH command. In one of your responses, you wrote:
"Also forgot to mention. While researching the latest Insteon command set tables for another problem, discovered that there is a new extended data Insteon command that does exactly what we'd like. Allow the PLC/PLM to send a command to a device, instructing that device to send one of it's group commands. Dohh!, so they finally gave in and created the command.
"The only bad thing is that it is an extended data command so it will most likely ONLY work with the PLM (not the PLC) and will also require the controlling device to be I2 (Insteon 2 or the later firmware devices) capable. Also, I'll have to implement extended command functionality within PowerHome so we've still got a little while before we can start making use of this."
Is this something that is now available with the 2/2.1 releases? I apologize if it's in the help documentation, but I can't track it down if it is... Thanks!
BTW, the 2.1 release resolved my other KPL issue (inability to load KPL config), so _many_ thanks!!
jtf
|
Active Topics 
Memberlist 
Search 
Help
Register 
Login
PowerHome Messageboard : PowerHome General
Topic: Syncing Switchlinc and KPL buttons?
