| Author |
|
Lenny
Senior Member
Joined: January 06 2008
Online Status: Offline
Posts: 102
|
| Posted: October 11 2008 at 23:22 | IP Logged
|
|
|
Anyone else having problems with the problems with the "Enable Pending" in the PLC/PLM Settings not staying after saving are reinit/restart?
If I update the poll interval to 11 it saves that fine... Just seems to be the Enable Pending.
Same thing with the "Enable Pending Operations" in the Controller Settings.
I saw an older post on this problem but that was prior to PowerHome2 and didn't help.
Does anyone know if there is an active bug list any place for V2?
|
| Back to Top |
|
| |
takig
Newbie
Joined: July 31 2008
Location: United States
Online Status: Offline
Posts: 4
|
| Posted: October 16 2008 at 20:39 | IP Logged
|
|
|
Lenny,
I have the same issue. I noticed this when my changes to the insteon links did not update.
Please let me know if you have found a fix for this.
Thanks,
Taki
|
| Back to Top |
|
| |
Lenny
Senior Member
Joined: January 06 2008
Online Status: Offline
Posts: 102
|
| Posted: October 16 2008 at 20:51 | IP Logged
|
|
|
Yeah I contacted Dave and I felt kind of silly not trying this my self but here is the fix. In my case I have a PLC so I just toggled my controller from "Insteon DM" to "Insteon PLM" and back again. Below is his explanation.
Lenny
"Concerning the "Enable Pending" not sticking, it's probably because I didnt think to add an extra parameter during the database upgrade process. It should be easy to correct though. Give this a try: Open the PowerHome Explorer and navigate to PowerHome|Setup|Controllers. Find the line where your PLM is defined. Change the "Controller Type" from an "Insteon PLM" to any other controller type. Change the controller type back to an "Insteon PLM" and then press the "Settings" button. Set the values the way you like them, press "Done" and then close PowerHome Explorer. Reinitialize. The "Enable Pending" should stick from now on."
|
| Back to Top |
|
| |
takig
Newbie
Joined: July 31 2008
Location: United States
Online Status: Offline
Posts: 4
|
| Posted: October 18 2008 at 00:11 | IP Logged
|
|
|
Lenny,
Thanks for the info. Your fix worked.
Taki
|
| Back to Top |
|
| |
Active Topics 
Memberlist 
Search 
Help
Register 
Login
PowerHome Messageboard : PowerHome General
Topic: "Enable Pending" PH V2
