kev21986
Senior Member
Joined: April 04 2007
Location: United States
Online Status: Offline
Posts: 199
|
| Posted: March 15 2009 at 09:02 | IP Logged
|
|
|
I have a PLC 2414u from a few years ago. I had used it with a trial of PH when I first got it and it worked great. At the time I was just experimenting with the concept and never really did anything with it. I bought a house and now I am trying to get it to work and just ordered another KeypadLinc and SwitchLinc. The problem I am running into is that the PLC wont connect. It gets stuck in the infinate loop or trying to connect and erroring... repeat. From the InHomeFre I ran a getplcstatus and I get this.
getPLCstatus=beginlist
port=USB4
connected=True
firmware=0.0
id=
devicetype=InsteonPLC-USB
lastErrorMsg=#0:
endlist
Did the firmware get erased? or is it just not able to read the firmware version?
A dm command gives me this
DM=active,1.01.138.308,3/15/2009 8:52:30 AM,responded,,0.0,xdevices=True
When I plug the usb cable in I get this in the SDM log
usbarrival=4287,4,1024,SmartHome,SmartHome PowerLinc USB E,
Any help would be greatly appreciated.
|
Active Topics 
Memberlist 
Search 
Help
Register 
Login
PowerHome Messageboard : PowerHome Hardware
Topic: PLC 2414u Problems
