PowerHome Messageboard: Creating and using Insteon Groups

Active Topics

Memberlist

Help

PowerHome General
PowerHome Messageboard : PowerHome General

Topic: Creating and using Insteon Groups

Author

Message

<< Prev Topic | Next Topic >>

sifu128
Groupie
Groupie

Joined: February 08 2011
Location: United States
Online Status: Offline
Posts: 62

Posted: February 09 2011 at 18:06 \| IP Logged

The funny thing is that it looks to be in an endless loop. I have hard reset it and restarted PH. The same damn thing happens. What is strange is that this is a new PLC and it does work.

I also see it keep saying that GETLINKS=Failed due to database corruption. If you hard reset it, that should not be the case correct?

BeachBum
Super User

Joined: April 11 2007
Location: United States
Online Status: Offline
Posts: 1880

Posted: February 09 2011 at 18:08 \| IP Logged

Try bring up SDM alone without PH in the window type DM then isresponding.

__________________
Pete - X10 Oldie

grif091
Super User

Joined: March 26 2008
Location: United States
Online Status: Offline
Posts: 1357

Posted: February 09 2011 at 18:20 \| IP Logged

That is how my last PLC started failing. I did what Pete suggested. Brought up SDM3 without PH and issued the same command that PH did during initialization. The PLC failed the same way it did under PH.

Smarthome had a few suggestions, now of which cleared what the PLC says is a corrupted database.

__________________
Lee G

sifu128
Groupie
Groupie

Joined: February 08 2011
Location: United States
Online Status: Offline
Posts: 62

Posted: February 09 2011 at 18:23 \| IP Logged

Without PH started I killed everything and then just brought up SDM v 1.01.138.308.

PLC:eventraw=02
PLC:receiveinsteonraw=02 07 49 C6 08 A5 64 47 14 01
PLC:eventraw=01
PLC:eventraw=03
PLC:receiveinsteonraw=01 07 49 C6 14 88 D5 42 14 01
downloadTimer started
timerActivate enabled

I typed in DM and I get the following:

SDM:DM=active,1.01.138.308,2/9/2011 6:22:04 PM,responded,14.88.D5,2.13,xdevices=False
starttime=00:10
ui:isresponding
PLC:isresponding=True
uifinished:isresponding

Right now without PH started I do not have the constant polling. I can issue direct commands to control the responders. When I start ph back up it is like its stuck in an endless loop trying to getlinks. Could this be something with ph?

Edited by sifu128 - February 09 2011 at 18:25

BeachBum
Super User

Joined: April 11 2007
Location: United States
Online Status: Offline
Posts: 1880

Posted: February 09 2011 at 18:25 \| IP Logged

Lee also the SALAD could be corrupted.

While in SDM in window type verifycoreapp should come back with true or false.

BTW Lee got a Snow Rake yet

__________________
Pete - X10 Oldie

BeachBum
Super User

Joined: April 11 2007
Location: United States
Online Status: Offline
Posts: 1880

Posted: February 09 2011 at 18:27 \| IP Logged

I would highly recommend if you have yet to clear, download core apps add full since you are a PLC Not min.

__________________
Pete - X10 Oldie

BeachBum
Super User

Joined: April 11 2007
Location: United States
Online Status: Offline
Posts: 1880

Posted: February 09 2011 at 18:30 \| IP Logged

And on the side of Pending my scenario is still pending after one BSOD and 2 reinits because I dont have Pending checked.

__________________
Pete - X10 Oldie

sifu128
Groupie
Groupie

Joined: February 08 2011
Location: United States
Online Status: Offline
Posts: 62

Posted: February 09 2011 at 18:30 \| IP Logged

I take that back. I ran the SALad Downloader and I got the following:

ui:0001:0001:port=?
PLC:disconnect=OK
PLC:0001:0001:port=true
ui:0001:0002:getport=
PLC:0001:0002:getport=USB4
ui:0001:0003:getWebSALadDownloadList=
PLC:0001:0003:getWebSALadDownloadList=beginlist
Core Application,coreApp.slb,coreApp.html,1.00,8/24/2005 4:00:00 PM,Smarthome
CLEAR Core Application,clearCoreApp.slb,clearCoreApp.html,1.00,8/24/200 5 4:00:00 PM,Smarthome
HDK SALad Application,HDK.slb,HDK.html
Timer Core Application 1.06,timerCoreApp06.slb,timerCoreApp.html,1.06,12/19/2005 4:15:00 PM,Smarthome
endlist
downloadTimer started
timerActivate enabled
SDM:DM=active,1.00.116.116,2/9/2011 6:31:19 PM,responded,14.88.D5,2.13
ui:PLC:isresponding=True
ui:verifycoreapp
uifinished:verifycoreapp
verifyCoreApp
PLC:PLC:isresponding=True

Edited by sifu128 - February 09 2011 at 18:32

sifu128
Groupie
Groupie

Joined: February 08 2011
Location: United States
Online Status: Offline
Posts: 62

Posted: February 09 2011 at 18:33 \| IP Logged

Would you happen to know what this error is.

In Smarthome SALad Downloader I click on core application and I get the following

ui:0001:0005:downloadSALadFile=C:\Program Files\Smarthome\SALad Downloader\coreApp.slb
PLC:0001:0005:ERROR=012:MapNotLoaded-PLC not connected or no valid map. Try using isResponding first.
PLC:0001:0005:downloadSALadFile=-7
ui:isResponding

I run isresponding and I get: PLC:isresponding=True

sifu128
Groupie
Groupie

Joined: February 08 2011
Location: United States
Online Status: Offline
Posts: 62

Posted: February 09 2011 at 18:36 \| IP Logged

I am calling smarthome. I will keep everyone posted!!

BeachBum
Super User

Joined: April 11 2007
Location: United States
Online Status: Offline
Posts: 1880

Posted: February 09 2011 at 18:41 \| IP Logged

But did you try PHs Core Apps?

__________________
Pete - X10 Oldie

sifu128
Groupie
Groupie

Joined: February 08 2011
Location: United States
Online Status: Offline
Posts: 62

Posted: February 09 2011 at 18:46 \| IP Logged

Ok, smarthome tells me that if the device can control the lights there is nothing wrong with it.

Does this look fimilar?

PLC:verifyCoreApp=C:\Program Files\powerhome\Smarthome\Device Manager\coreApp.slb not found
uifinished:verifycoreapp

BeachBum
Super User

Joined: April 11 2007
Location: United States
Online Status: Offline
Posts: 1880

Posted: February 09 2011 at 18:51 \| IP Logged

Yup I dont have one either. So what generated that message?

__________________
Pete - X10 Oldie

sifu128
Groupie
Groupie

Joined: February 08 2011
Location: United States
Online Status: Offline
Posts: 62

Posted: February 09 2011 at 19:04 \| IP Logged

I fixed that. What I did was a search on my system for the coreApp.slb and put it in that directory. I opened up PH and then did a download and then add full. I did a reinit and now no more endless loop and EVERYTHING IS FIXED!!! It is processing pending operations and now showing completed commands!!!!!

UI:ConnectedAndReady
ui:getplcstatus
uifinished:getplcstatus
PLC:getPLCstatus=beginlist
port=USB4
connected=True
firmware=2.13
id=14.88.D5
devicetype=InsteonPLC-USB
lastErrorMsg=#0:
endlist
ui:getlinks
uifinished:getlinks
ProgressStart
ProgressMax=1024
Progress=0%,0,1024
Progress=12%,128,1024
Progress=25%,256,1024
Progress=37%,384,1024
Progress=50%,512,1024
Progress=62%,640,1024
Progress=75%,768,1024
Progress=87%,896,1024
ProgressEnd=True
PLC:getlinks=beginlist
id=17.A3.EC,mode=sla,addr=FC48,laddr=0000,g=1,cmds=00 00,d=00
id=07.49.C6,mode=sla,addr=FCE0,laddr=0000,g=1,cmds=00 00,d=00
id=09.11.2D,mode=sla,addr=FF48,laddr=0000,g=1,cmds=00 00,d=00
id=17.88.24,mode=sla,addr=FF68,laddr=0000,g=1,cmds=00 00,d=00
id=07.45.1E,mode=sla,addr=FF80,laddr=0000,g=1,cmds=00 00,d=00
id=07.30.0C,mode=sla,addr=FFC8,laddr=0000,g=1,cmds=00 00,d=00
id=09.0A.01,mode=mas,addr=FFF8,laddr=0000,g=1,cmds=00 00,d=00
endlist

Now when I am in device status and I click on On I get the following:

PLC:sendinsteonraw=True
uifinished:!sendinsteonraw=00 00 00 00 00 01 CF 11 FF
PLC:eventraw=03
PLC:eventraw=03

Guys, THANK YOU SO MUCH.

TO RECAP, missing the slb file was the problem.

Edited by sifu128 - February 09 2011 at 19:13

If you wish to post a reply to this topic you must first login
If you are not already registered you must first register

<< Prev Page of 2

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum